Smart Control Panel - Helsinki 6"

• 6-inch touch screen
• PX30 quad-core Cortex-A35, 2 GB RAM, 8 GB ROM
• Ethernet and Wi-Fi
• Gateway for PIERRE Wave (Zigbee 3.0)
• Direct Modbus control
• Two built-in relay circuits, 200 W each
• Rotary control knob with its own display

The Room Control Display Helsinki 6" replaces a conventional switch plate and runs the room from one screen. It is built on a PX30 quad-core Cortex-A35 with 2 GB RAM and 8 GB storage, behind a 6-inch portrait touch screen at 720x1440.

The two built-in relays provide an option for direct ON/OFF control. Two relay circuits rated 200 W each are built in, so the panel can switch the room’s own lighting rather than only issuing commands to other devices. The Modbus port allows the display to control fan coils, heat pumps, and other plant equipment directly, without requiring a separate gateway in the room.

The integrated brightness and temperature sensors add another layer of possibilities for advanced automation. By using the display’s built-in outputs, including relays and Modbus, users can create customized sensor-based automations.

The control knob and knob display provides a more familiar thermostat-like experience and can also be configured to control selected I/Os from the system’s I/O list.

For installation: the Helsinki takes an 86x86x50 mm back box with 60 mm fixing centres. That 50 mm depth is not optional — specify the Room Control - Recessed Wall Mounting Box for the wall construction on site. It is rated IP20 and runs from 0 °C to +40 °C at 5–90% RH non-condensing.